The Internet is becoming more like a network engineer’s dream job.
While the job is still a fairly remote one, the demands of the job can be daunting, and as a result, many engineers are looking for a way to work remotely.
Some of those engineers, however, have already figured out how to be an internet-connected network engineer.
We spoke with a number of network engineers who have used these technologies to improve their lives, including Cisco engineer Bryan J. Dube, who used them to manage an Internet of Things (IoT) project, and Microsoft engineer Adam Bienkowski, who built his own virtual network for his home.
Dube used Cisco’s Firepower network management tool to manage his IoT network.
He also used a virtual machine for his project called Redmine.
Using Cisco’s networking tool, he said, he could easily manage the various devices on his home, including routers, switches, switches and switches hubs, among others.
“With Cisco’s tools, it’s like a firewall,” he said.
“It was very easy to do.”
Dube said that in many ways, the Cisco Firepower virtual network management software was the perfect tool to work on his IoT project.
The tool, which has a dedicated page on Cisco’s website, was designed to help engineers work remotely by allowing them to configure and manage networks.
The Cisco FirePower virtual network manager was also able to manage Cisco’s other routers and switches as well as some of the devices that were not part of Cisco’s network.
For Dube’s project, he used Cisco FirePro, which he said allows him to connect to a large network without having to configure any additional equipment.
When Dube needed to connect some devices to his project, Cisco’s virtual network managed the devices and it automatically set up a router that he could then connect to remotely.
For D, his router worked just fine.
“[I used] FirePro to connect devices,” he explained.
“FirePro automatically set the IP address of the device to point to my router.”
When he needed to set up some additional devices to connect more devices, he was able to do that by simply connecting a switch to his router, which was able a simple, one-click configuration process.
“That router was able do that automatically, and I was able quickly and easily configure my router to connect another device to my network,” he added.
Once the Cisco virtual network was connected to the device, Dube said, “I was able configure that device to automatically connect to my other devices.”
He said that by using the virtual network to manage the device’s IP address, he made sure the device was always connected to a designated IP address.
By using Cisco’s Virtual Network Manager, Dubes was able “to manage all the different devices and connect to them using a single interface, a single virtual network.”
With the Cisco Virtual Network manager, Daves said, Cisco made it easy for him to create a new device and then connect it to a Cisco router or switch.
With the device connected to Cisco’s router, Daven said, the router would automatically start and connect.
It was also easy for Daven to setup the device so that it would automatically connect when the device would connect to Cisco, which enabled him to do things like connecting multiple devices to the same device without having a single switch.
“It was a really, really easy thing to do,” he concluded.
“You just needed to plug in the device and everything would connect.”
For more on Cisco, check out our blog.